What are the different types of marble cutting?

What are the different types of marble cutting?

In addition to marble cutting stone types, this article also provides a construction stone cutting classification. As for the types of marble cutting, it should be noted that at the same time, the process of cutting large blocks of marble is mandatory, difficult to perform, and can be used to prepare marble. Marble cutting types, stone cutting methods, building stone types and building stone cutting tools are described below.

How are stones cut?

Marble cutting is a broad and multifaceted category as it involves many factors. Two important factors when cutting stone are the type of stone and its use. Therefore, when cutting stones, you must first pay attention to the type.

 The stones are of the following types: Jewelry such as diamonds, emeralds and rubies. Semi-precious stones such as agate and turquoise. Tool stones such as granite, travertine and basalt and architectural stones such as granite, marble, porcelain and sandstone.

As mentioned above, to cut stones, you need to choose the right tools. Wood and slate stones are cut into slabs and sheets of various thicknesses, sizes and shapes, depending on the order.

 Therefore, the extracted stone blocks and slabs are transferred to the stone factory and then processed for final use. At the factory, the rough stones are scaly.

Drill types include Peak, Saw tooth, Vertical, Head, Broken, 40, 20.

building stone cutting tool

Most stones are used in architecture, facade and upholstery. Therefore, cutting the stone is very important.

As mentioned earlier in this article on types of marble cut, it is the nature of the stone and its end use that determines how and by what means the stone is cut.

If the stone needs to be crushed, this is done with a single-blade machine using a steel disc with about 35-37 diamond teeth. However, instead of a single sliding machine, you can also use a steel diamond wire or a cutting machine. With this blade, the stone block is cut on one or more sides to obtain a smooth surface with a regular and proportional shape, suitable for sawing.

Due to the human need for stones, which is rooted in history, many stone cutting tools have been made until now, but the production, development and development of these tools still continues. The masonry category was not without technological advances, and today, unlike in the past, there are masonry accessories that do not require a lot of energy and experience.

Firstly, stone cutters can be divided into two portable groups and a workshop. Handheld devices are suitable for situations where field placement is required. These devices are suitable for stones with a length of 65-265 cm.

cut larger stones

The only way to cut larger stones is to use a machine at the job site. Knowledge of the components of a stone cutting machine has its benefits. Main motors, mechanical screw guides, water pumps, metal frames, saw blade frames, stationary and mobile bags.

Other stone cutting tools include stone coating machines, stone measuring machines (to match the surface and thickness of the stone), single disc and double disc sieves (for vertical cutting), bench top machines, women’s tools (for zinc engraving). building stone), soft saws, hard saws, stone cutters, bar stops, head saws, vertical machines.

Types of building stones.

The stone can be used in several operations from the moment it enters the cutting factory. A smooth cutting machine is used to cut stones. In the first stage, the cut is done with a saw or pickaxe. The saw itself can be divided into two categories: soft and hard.

 Cutting includes vertical cut (e.g. under or beside stairs), head cut (carpet type stone cut), side cut, Persian pot cut (stone edge facade) (stone cleaning) ), cone cutting tools, stair blowing tools), egg tools (rounding the ends of stones), spoon tools (facade and roman columns).

Leave a Reply

Your email address will not be published.